View C9016-2X_4776908.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PR ELI
OVERVIEW
HIGH-SPEED GATED IMAGE INTENSIFIER UNITS
C9016-2X, C9546, C9547 SERIES
LLeft: C9016-2X series + Controller, Center: C9546 series, Right: C9547 series
MI N
AR Y
FEATURES
GHigh Speed Gating
C9016-2X Series: 20 ns ~ C9546 series: 3 ns ~ C9547-01/-02: 5 ns ~ C9547-03/-04: 10 ns ~
Image intensifiers (I. I.) are devices capable of intensifying an image at high gain and high-speed gating (electronic shutter operation). This allows them to capture "instantaneous images" of ultrafast phenomena that occur in extremely short periods of time. Hamamatsu C9016-2X, C9546 and C9547 series image intensifier units consist of a compact head that integrates an image intensifier with a high-speed gate operation circuit and a remote controller. Built-in image intensifiers are available with two standard photocathodes which are GaAsP photocathode and multialkali photocathode. The GaAsP photocathode is ideal for low-light-level imaging in the visible region such as for fluorescence observations. The multialkali photocathode on the other hand offers high sensitivity over a wider spectral response range from the UV through near IR region so observations can be made at various wavelengths. A high-speed shutter camera can easily be configured by simply connecting the image intensifier head to the front of a CCD camera. Various types of CCD cameras can be optically connected through a relay lens or by fiber coupling for highly efficient light transmission from the image intensifier. CCD cameras with fiber optic window are available as options. Image intensifier gain can be adjusted from the remote controller or a PC (personal computer) through USB interface (Ver. 1.1 compatible with Windows 2000 / XP). Built-in over-light protection circuit allows using these image intensifier units without having to worry much about the input light level.
GGate Operation in Accordance with Input Gate Pulse Width and Its Repetition Rate GSuperior Shutter Ratio Even in UV region
MCP gating: C9546, C9547 series
GHigh Performance Image Intensifier
High quantum efficiency: GaAsP model Wide spectral response: Multialkali model High resolution and High gain
GBuilt-in Protective Circuit Prevents Damage from Excessive Light
APPLICATIONS
GAnalysis of High-speed Phenomenon
Engine combustion state Plasma emission / Discharge / PIV / Flow / Spray and so on. Time resolved fluorescence imaging for dyed cell/tissue
GImaging of Low-light-level Emission and Fluorescence
SPECIFICATIONS
Parameter Type No. C9016-21 C9546-01 C9547-01 700 214 192 50 45 17 B 25 C Borosilicate glass GaAsP 280 to 720 530 17.5 B 25 C Synthetic silica Multialkali 185 to 900 430 mm -- -- nm -- -- -- 4.0 x 106 2.4 x 106 3.0 x 106 1.8 x 106 (W/m2)/(W/m2) lm/cm2 W/cm2 Lp/mm -- lx W/cm2 cd/m2 V W C % (lm/m2)/lx 15 14 % C9016-22 C9546-02 C9547-02 Luminous Sensitivity (Typ.) C9016-2X Radiant Sensitivity A C9546 Photocathode (Typ.) C9547 Sensitivity C9016-2X Quantum Efficiency A C9546 (Typ.) C9547 C9016-2X C9546 Effective Diameter C9547 Photocathode Window Material Photocathode Material Spectral Response Peak Wavelength Window Material Phosphor Phosphor Material D Screen Decay Time C9016-2X Luminous Gain (Typ.) C9546 C9547 Gain C9016-2X Radiant C9546 Emittance Gain A C9547 (Typ.) Luminous (Typ.) Equivalent Background Input (EBI) Radiant A (Typ.) Limiting Resolution (Typ.) Image Magnification Maximum Input Luminous (Typ.) Light Level E Radiant A (Typ.) Average of Max. Phosphor Screen Brightness Power Requirement C9016-2X C9546 Power Consumption (Max.) C9547 Operating Ambient Temperature Storage Temperature Operating and Storage Humidity F C9016-23 C9546-03 C9547-03 230 53 C9016-24 C9546-04 C9547-04 150 47 Unit A/lm mA/W
2.2 x 104 2.0 x 104
FOP P43 See Figure 8 5.0 x 106 1.1 x 104 3.0 x 106 1.0 x 104 6.8 x 103 6.2 x 103
1.4 x 104 3.4 x 106 1.3 x 104 2.0 x 106 1.2 x 104 1.9 x 106 -12 3 x 10 8 x 10-15 50 36 1 1.5 x 10-3 4.0 x 10-10 7.0 x 10-6 1.6 x 10-12
1 x 10-11 3 x 10-14 57 5.0 x 10-3 8.0 x 10-10 32 1.6 x 10-5 2.4 x 10-12
10 100 to 240 4.8 6 7.2 8.4 10.8 0 to +40 -20 to +50 Below 70 6 7.2 8.4 10.8
NOTE: AAt wavelength of peak sensitivity BEffective output area is 12.8 mm x 9.6 mm. Take the effective area of the camera and reduction rate of the relay lens to be used into account. CEffective output area is 16 mm x 16 mm. Take the effective area of the camera and reduction rate of the relay lens to be used into account. DP-24 and P-46 phosphor screens are also available. EDuring normal (continuous) mode at maximum gain FNo condensation
Protective Functions
Parameter Repetition Max. Display Rate C9016-2X C9546 * C9547 2 kHz 30 kHz Red LED is lit continuously * Shuts off operation during excessive light Red LED flashes * (on rear of head and remote controller operation panel) Red LED is lit continuously * (on rear of head and remote controller operation panel) Reset switch on the remote controller or sending command via USB interface
Controllable Functions
Parameter Gain Setting Operation Mode Switching Excessive Light Protection Display Excessive Light Protection Reset Excessive Gate Input Monitor Integrated screen Current Monitor Remote Controller PC (software) C9546G C9546G C9016-2X C9547 C9016-2X C9547 Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes No Yes Yes Yes Yes No Yes Yes Yes Yes Yes
Excessive Warning Light Protection Shut off Protection Circuit Reset
NOTE: * C9546 and C9547 series The LED on near of head can be turned out by control software.
NOTE: GThe control mode automatically switches to PC by connecting USB cable even if the remote controller is connected.
GATE SPECIFICATIONS
Parameter Normal Mode Operation Mode Gate Mode Level Input Impedance Gate Signal Pulse Width A Input Repetition Rate B (Max) when MCP is gated Gate off Time Gate Time A Gate Rise Time (Typ.) Gate Fall Time (Typ.) Gate Output Delay Time when MCP is gated Jitter (Max.) Output Level Gate Time Pulse Width Monitor Output Impedance
NOTE: APlease refer to Figure 1 and Figure 3. BBuilt-in protection circuit
C9546 Series C9547-01, -02 C9547-03, -04 Continuous Mode Normally OFF, Turns ON when the gate signal is input TTL Positive logic C-MOS Positive logic 50 15 ns to DC 5 ns to DC 8 ns to DC 20 ns to DC 30 kHz 2 kHz 10 kHz -- 20 s Min. -- 10 ns to DC 3 ns to DC 5 ns to DC 20 ns to DC 8 ns 2 ns 3 ns 15 ns 10 ns 3 ns 4 ns 15 ns 36 ns 2 ns 46 ns 2 ns 86 ns 2 ns -- 0.5 ns 2 V Positive logic (at 50 termination) -- Gate time (FWHM) -- 50 --
C9016-2X
Figure 1: C9016-2X Series Gate Time Input / Output Characteristics
TAPPB0028EA
Figure 2: C9016-2X Series Time Sequence
DELAY TIME: 46 ns 2 ns NOTE: A: 4.4 V to 5 V (50 ) B: 3.5 V (50 )
100 A
GATE INPUT PULSE WIDTH > 20 ns B
GATE TIME (ns)
GATE INPUT PULSE 50 GATE TIME * (FWHM) NORMALLY OFF GATE OPERATION (I.I.) 50 100
TAPPC0115EA
JITTER 0.5 ns (MAX.)
* Gate time (FWHM) is the same as gate input pulse width.
GATE INPUT PULSE WIDTH (ns)
Figure 3: C9546 * C9547 Series Gate Time Input / Output Characteristics
1000
TAPPB0088EA
Figure 4: C9546 * C9547 Series Time Sequence
DELAY TIME: Td
INPUT PULSE LEVEL: 2 V (at 50 )
A
GATE INPUT PULSE WIDTH: C B
GATE TIME (ns)
100 WHEN MCP IS UNGATED WHEN MCP IS GATED (10 kHz Max.) 10
GATE INPUT PULSE
GATE TIME (FWHM) NORMALLY OFF GATE OPERATION (I.I.) 7 ns 1 ns JITTER 0.5 ns (MAX.)
GATE TIME (FWHM) 1 GATE TIME MONITOR 1 10 100 1000 D
GATE INPUT PULSE WIDTH (ns)
NOTE: A: 2 V to 5 V (50 ) B: 2 V (50 ) C: See Figure 3 D: 2 V (50 ) Td: 36 ns 2 ns (when MCP is ungated) 86 ns 2 ns (when MCP is gated) MCP gate operation starts 26 ns prior to the rise edge of TAPPC0116EA GATE OPERATION and ends 26 ns after the fall edge.
CHARACTERISTICS
Figure 5: Typical Spectral Response
103
TAPPB0089EA
Figure 6: Typical Luminous Gain
107
TAPPB0090EB
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
MULTIALKALI PHOTOCATHODE
GaAsP PHOTOCATHODE 106
LUMINOUS GAIN (lm/m2)/lx
102
C9016-22 C9546-02 C9547-02 105
C9016-24 C9546-04 C9547-04
101
104
103 C9016-23 C9546-03 C9547-03
100 102 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 10-1 100 200 300 400 500 600 700 800 900 1000 101 Min.
C9016-21 C9546-01 C9547-01
Max.
WAVELENGTH (nm)
GAIN SETTING
Figure 7: Typical Phosphor Screen Spectral Emission
100
TAPPB0080EB
Figure 8: Typical Phosphor Screen Decay Characteristics
102
TAPPB0081EB
P43 80
RELATIVE INTENSITY (%)
RELATIVE INTENSITY (%)
P24 101 P46
60
P24 P43
40 P46 20
100 ns 100 100 ns 1 ms INPUT LIGHT PULSE WIDTH 100 ns 10 s 1 ms 1 ms 10-5 10-4 10-3 10-2
0 350
400
450
500
550
600
650
700
10-1 10-8
10-7
10-6
WAVELENGTH (nm)
DECAY TIME (s)
DIMENSIONAL OUTLINES (Unit: mm)
GHead
C9016-2X series
C-MOUNT 33 34.5 0.5 OUTPUT WINDOW OUTPUT WINDOW 4-M3 CONNECTOR (AUX) FOR REMOTE CONTROLLER 112 POWER SWITCH POWER/PROTECTION DISPLAY LED AC ADAPTER CONNECTOR
50
83
IMAGE INTENSIFIER UNIT
USB CONNECTOR FRONT VIEW 4 SIDE VIEW 1 90 30 REAR VIEW
66
30
4-M3 45 1/4"-20UNC
(Weight: Approx. 570 g)
BOTTOM VIEW
TAPPA0061EC
C9546 series
80 34.3 66 50 0.5 OUTPUT WINDOW C-MOUNT 1
C9547 series
80 80 67 4-M3 33.3 0.5 1.8 C-MOUNT
4-M3
OUTPUT WINDOW
GATE TIME MONITOR OUTPUT (BNC) POWER/PROTECTION DISPLAY LED AC ADAPTER CONNECTOR POWER SWITCH USB CONNECTOR
GATE TIME MONITOR OUTPUT (BNC) POWER/PROTECTION DISPLAY LED AC ADAPTER CONNECTOR POWER SWITCH USB CONNECTOR
32
143
41
77
1
1
77
159
90 REAR VIEW 50 30
GATE INPUT (BNC)
SIDE VIEW
CONNECTOR (AUX) FOR REMOTE CONTROLLER
90 REAR VIEW 50 30
GATE INPUT (BNC)
SIDE VIEW
CONNECTOR (AUX) FOR REMOTE CONTROLLER
1/4"-20UNC
1/4"-20UNC
50 30
(Weight: Approx. 1 kg) 45 BOTTOM VIEW
TAPPA0071EA
50 30
(Weight: Approx. 1 kg) 45 BOTTOM VIEW
TAPPA0072EA
4-M3
4-M3
GRemote Controller
C9016-2X series
GATE INPUT (BNC) CONNECTION CABLE TO HEAD
C9546, C9547 series
CONNECTION CABLE TO HEAD
48
48
2000
REAR VIEW GAIN ADJUSTMENT KNOB POWER/PROTECTION DISPLAY LED POWER/PROTECTION DISPLAY LED
REAR VIEW GAIN ADJUSTMENT KNOB
RESET SWITCH OPERATION MODE SELECTOR SWITCH NORMAL/GATE 111
RESET SWITCH OPERATION MODE SELECTOR SWITCH NORMAL/GATE 111
REMOTE CONTROLLER
REMOTE CONTROLLER
70 TOP VIEW
29 SIDE VIEW (Weight: Approx. 300 g)
TAPPA0062EC
70 TOP VIEW
29 SIDE VIEW (Weight: Approx. 300 g)
TAPPA0073EA
ACCESSORIES (SOLD SEPARATELY)
GC9018, C9018-01 CCD cameras with fiber optic window
The C9018 series CCD cameras have a restart/reset function and are designed to read out images from C9016 and C9546 series image intensifier units. Fiber coupling allows more highly efficient image readout than lens coupling. The C9018 series cannot be used with C9547 series image intensifier units.
SPECIFICATIONS
Parameter Signal Systems Charge Accumulation Effective Image Area (H x V) Number of Pixels (H x V) Resolution (Horizontal) Power Requirement Power Consumption Operating Ambient Temperature Storage Temperature Operating and Storage Humidity* Weight
NOTE: * No condensation
C9018 C9018-01 CCIR EIA Frame storage / Field storage, switchable 12.8 x 9.6 752 x 582 768 x 494 560 570 +9.0 to +16.0 1.6 0 to +40 -20 to +50 Below 70 170
Unit -- -- mm -- TV lines V W C C % g
DIMENSIONAL OUTLINE (Unit: mm)
6 50 DIP SWITCH DC IN/SYNC CONNECTOR (12 PIN) 4- 3.2
VIDEO OUT/DC IN/SYNC
47.5 0.5
INPUT WINDOW FOP 42
33
32
EFFECTIVE AREA 12.8 x 9.6 75 TERMINATER SWITCH 66 FRONT VIEW
75
MIN MAX HD/VD M GAIN
GAIN SWITCH HD/VD SWITCH 1
REAR VIEW
SIDE VIEW
TAPPA0063EA
2000
SETUP EXAMPLE WITH OPTICAL ACCESSORIES
GC9016-2X Series
OBJECTIVE LENS WITH C-MOUNT
CCD CAMERA WITH FIBER OPTIC WINDOW C9018, -01 CAMERA CABLE A5963 SERIES
AC ADAPTER
VIDEO OUTPUT (EIA, CCIR) AC100 V to 240 V
MICROSCOPE
3: 2 RELAY LENS A5309
DIGITAL CCD CAMERA
POWER SUPPLY
C9016-2X SERIES
C-MOUNT ATTACHMENT FOR MICROSCOPE HEAD
RELAY LENS ADAPTER A9017
2: 1 RELAY LENS A2098
CCD CAMERA (1/2 INCHES)
IEEE1394 EIA-644 (VDS) Camera Link
IMAGE INTENSIFIER UNIT
CD-ROM
CONTROL SOFTWARE
USB CABLE 5 m4 PC5 (USB)
REMOTE CONTROLLER3 AC ADAPTER1 AC CABLE2
REMOTE CONTROLLER
GATE INPUT
CONNECTING ITEMS
The recommended connecting items are follows. It dependson on the operation mode and the gain control method. Operation Gain Control D C/Gate Remote Controller PC DC PC Gate Connection 123 1245 12345
TAPPC0109ED
AC100 V to 240 V
IMAGE INTENSIFIER UNIT (C9016-2X SERIES) ACCESSORIES (SOLD SEPARATELY)
GC9546, C9547 Series
OBJECTIVE LENS WITH C-MOUNT
CCD CAMERA WITH FIBER OPTIC WINDOW C9018, -01 CAMERA CABLE A5963 SERIES
AC ADAPTER
VIDEO OUTPUT (EIA, CCIR) AC100 V to 240 V
MICROSCOPE
3: 2 RELAY LENS A5309
DIGITAL CCD CAMERA
POWER SUPPLY
C9546, C9547 SERIES
C-MOUNT ATTACHMENT FOR MICROSCOPE HEAD
RELAY LENS ADAPTER A9017 A9549
2: 1 RELAY LENS A2098
CCD CAMERA (1/2 INCHES)
IEEE1394 EIA-644 (VDS) Camera Link
DELAY PULSE GENERATOR
OSCILLOSCOPE (GATE TIME MONITOR)
GATE INPUT REMOTE CONTROLLER3
TRIGGER INPUT
CD-ROM AC AC CABLE2 AC100 V to 240 V ADAPTER1
CONTROL SOFTWARE
REMOTE CONTROLLER
CONNECTING ITEMS
The recommended connecting items are as follows. It dependson on the gain control method. Operation Gain Control Connection Remote 123 D C/Gate Controller D C/Gate PC 1245
USB CABLE 5 m4 PC5 (USB) IMAGE INTENSIFIER UNIT (C9546, C9547 SERIES) ACCESSORIES (SOLD SEPARATELY)
TAPPC0121EA
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2005 Hamamatsu Photonics K.K.
WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TAPP1052E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
JUL. 2005 IP

▲Up To Search▲

Price & Availability of C9016-2X

	To Download C9016-2X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .